|
Sat, Jul 15, 06 at 15:37
| Please help, I have a phillips magnavox 50" chassis # PTV835, Model # 9P5034 C101. When first
turned on the picture goes to a concave type with colors around a white picture and 1/2 size, and the volume would go up and down, however after being left on for about 15 minutes the picture goes back to normal, It keeps getting worse and worse The sound seemed to get worse along with the picture. I have a limited knowledge of TV's but do know electronics pretty well. I'm guessing I have a voltage problem but do not know how to diagnose the part that's bad. Can you offer any suggestions? dana.dalbey@baytown.org |
Follow-Up Postings:
|
- Posted by ecollier2012 (My Page) on Thu, Jun 26, 08 at 18:44
| Check www.magnavoxhelp.com. They have information on how to fix this common problem. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.