Return to the Electronics Forum | Post a Follow-Up

SmartDrive 9 LW095NZ

Posted by Jenna824 (My Page) on
Mon, Jul 7, 14 at 1:52

My SmartDrive9 LW095NZ washing machine attempts to start filling at the beginning of a cycle, then stops and starts and stops and starts finally ending with beeping and the lights 2,4,6,7 showing. The spin cycle works fine and the taps are both on. I can't find an online manual with the diagnostic codes anywhere. Does anyone know what 2,4,6,7 means?

Follow-Up Postings:

RE: SmartDrive 9 LW095NZ

The lights you report is Code 86. LW095 is a Phase 5 machine. Fault Code 86 doesn't apply to Phase 5 machines per the service info I have.

For Phase 2 and 3 machines to which Fault 86 does apply, refer to Fault 106 for repair procedure.

86 = communications error between the display module and motor control module.

Fault 106
Primary action = replace the display module.

Secondary action = If the fault continues, replace the motor controller module. If that solves the problem, refit the original display module to see if the problem recurs. If not, then only the motor controller module was bad and the original display module can remain installed. If the problem does recur, then switch back again to the new display module with the new motor board.

Phase 5 for Fault 106 can also be caused by a bad pump, resistance less than 33 ohms.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electronics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here