|
Fri, Jun 27, 08 at 21:03
| I have an RCA VCR model VR646HF. Is probably 10 years old not used too much and has worked fine. Now seems to get no power. Have checked cord and connections but nothing happens when power button is pushed. I am looking for any ideas as to what internal problem might have occured. There is no sound or anything and display/clock does not come on.
Thanks for any ideas,
|
Follow-Up Postings:
|
| Check the fuse. Unplug the unit, remove the cover, it should be by the power supply (where the cord enters the back). When you said you checked the cord and connections, did you try a different outlet? Klaa2 |
|
| You could have had an electrical surge, particularly if your VCR wasn't plugged into a surge protector. VCR's are so inexpensive now that it is cheaper and far more reliable to buy a new or re-built one. Greg |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.