|
Mon, May 10, 10 at 18:14
| I can not align the red on the convergence page. I have followed the directions for aglinment but the red will not move.I have tried calling the mfg but because the tv is out of warranty they will not speak with me.Any help would be greatly appericated.Has anyone else had this problem? |
Follow-Up Postings:
|
| Call a tech. |
|
- Posted by rockstar90 (My Page) on Sat, Sep 25, 10 at 23:32
| To me it sounds as if your convergence Stk chips have blown when this happens its a possibility it took out some resistors and pico fuses too. I'm no TV repair tech but I fixed 2 TV's that had blown Stk's. Not much i can help you with but maybe put you on track to what the problems is called.... search up about TV convergence and try Philips convergence. Lots of rear projections got this problem do to the chip running extremely hot. If you can solder and have the equipment to solder you can probably do it your self much cheaper then a repair shop would charge you. |
Here is a link that might be useful: Repair kit Here
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.