Return to the Electronics Forum | Post a Follow-Up

Magnavox 55in. projection

Posted by jpn735361 (My Page) on
Mon, May 18, 09 at 17:22

I replaced the crt fluid and when I turned the set back on, there was a green glow about the picture. Tried convergence, etc and nothing helped. I read several things about possibly blowing out a chip on the crt board. Can you tell what these boards cost and where I can order them? Thanks for your time.
55P8288 (PTV910)

Follow-Up Postings:

RE: Magnavox 55in. projection

Check the boards for spilt fluid. Where did you get the supplies? If you bought a kit from they have free support.

Here is a link that might be useful: Tv Repair Kits

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electronics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here