|
| Hello,
I have a Phillips Magnavox model # PTV835 and something has gone wrong with the picture. The color seems to be…..strange. I go through all the color/tint/brightness settings but no matter what I do it almost looks dull, or too red in some places. You really can’t distinguish the colors very well anymore – it’s not like watching a black and white tv but the colors aren’t sharp anymore. Any ideas? Thank you!!!! |
Follow-Up Postings:
|
- Posted by Micolagirl (My Page) on Fri, Apr 15, 05 at 14:30
| I recently received a 56" Magnavox PTV835 ... Model 9P5034C102 manufactured 1-2000... Chassis # 29116256. The color alignment is way off. When you go into the screen to set the colors.. the pluses are way off. You fix one color & another goes out of align. For ex: when you fix the blue.. the red goes out of align... when you fix the red.. the blue messes up again. Can someone give me an idea as to what this problem might be before I spend a fortune hauling it in to a repair shop? Thanks! D |
|
| The ultimate test for color is to turn the color off. If the set is not black and white then you can see the problem. eg too red or too green. |
|
| I have a 65" PTV840, and athough I can determine the red and green shades and make some adjustments, it still lacks blue. The clearity is altered due to being so dark now. |
|
| MAGNAVOX PTV835: Can anyone provide me with a schematic for this model. I have no audio to the internal spkrs. I know of some problems with the ssb. I replaced it after checking the obvious(spkrs, solder joints, connections, etc)with no results. I am in need of a schematic to do a thorough check of the audio circuit. |
|
- Posted by ken(ken@greatlodge.com) onThu, Nov 1, 07 at 19:43
| My ptv835 has a washed out look to it. It's like the brightness is maxed out even if I adjust it all the way down (or up). It just doesn't make a big difference. I found where some Magnavox CRTs had a capacitor which was under spec and would do something similar. If I knew of such I would not have a problem replacing it (I know about flyback transformers, etc. and have worked on CRTs before). Sooo, if you manage to find a schematic - please do post about it here. Thanks |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.