|
Tue, Apr 17, 07 at 8:29
| we just finished our kitchen remodel including a built in computer desk. i would like to put the cpu inside of a cabinet. the cab is 15 in wide by 30 in or so deep and i am not sure of the height (standard kitchen cab height).
i was planning on making several 2 in holes in the side of the cabinet for wiring and air curculation. all help and advice is appriciated. |
Follow-Up Postings:
|
| The newer and larger the cpu, the more air is needed. I don't enclose any computer although I wish I could. If you must have it enclosed on the sides, make sure the back is totally open and that air can be drawn in when the pc is operational. Heat is the number one problem in computers. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.