Return to the Electronics Forum | Post a Follow-Up

Phillips 7P5451 question

Posted by gormanjr (My Page) on
Thu, Apr 5, 07 at 0:02

I have a phillips 7P5451 C101 chassis ptv780-AH01 and the picture seems to have a blue shadow around the whites. I tried to do the convergence and you cann see the red,and green fine but the blue line is very very faint. Tried to adjust level on back and either no blue, blue shadows or all blue (when turned all the way up). All three crts seem to be even in brightness. Any help would be greatly appreciated.

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electronics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here