|
Wed, Mar 19, 08 at 16:02
| I have a 2004 Philips 60PP920217F that has the red and green colors bending up about 2" on the top and bottom of the left side of the screen. It has happened about 4 times over the last 3 months, and in the past lasted a day or two, then seemed to reset itself to normal. I tried leaving it unpluged for hours with no effect, and this time the picture has stayed waive for over a week. I called Philips and they referred me to a service center that wanted 100$ to inspect, then 1$ per min for repair.
Does anyone know the solution to this problem? Thanks in advance for any help. |
Follow-Up Postings:
|
- Posted by larrylwill (My Page) on Wed, Mar 19, 08 at 22:13
| Check this thread. http://www.fixya.com/support/t203163-phillips_60pp920217f_convergence |
|
| Hi larrywill, Thank you for the link to that information. I just have two questions, is it the IC's, or the resistors, or both that need to be replaced? And do you know where I can get a schematic diagram for my TV? Thanks Again. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.