|
Fri, Mar 30, 07 at 4:46
| Hi Pee Wee,
I have a Magnavox 20mt1331/17 T.V. and it also comes on and has a 1" white line that flickers for about 5 seconds and then nothing. I saw another post with a 25" T.V. and you led him to the resister 3340. I also saw the one where you took another person to the resister close to the 3 wire plug-in on the board on this Model 20mt1331/17. I ohmed out the resister and it was bad, so I replaced it. After I replaced it I turned on the T.V. and the resister smoked and opened. Can you tell me what this resister protects? It looks like the tube but I am not sure. Do you have any suggestions. Thanks, canman1355 |
Follow-Up Postings:
|
- Posted by ice_cat0130 (My Page) on Tue, Nov 6, 07 at 14:37
| Hello, My tv is having the same problems now...Have you had any luck? Did the resister work? Do you think this is a picture tube problem? Any other methods you may suggest I try? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.