|
Thu, Feb 1, 07 at 21:02
| I have a rca model# 27r410t
we were watching tv and the picture went out first then the sound.now when I turn it on it flashes a little on the sides and powers down.must be sensing a problem? I unplugged it overnight and still the same response. this was new in 2005,circuit board is clean. have any areas or hints as to where to look in the electronics board?? Mitch |
Follow-Up Postings:
|
| Logically, I would look at the low voltage power supply board or circuit. This supplies current to all your circuits and the High Voltage Horizontal and Verical circuits. That's where I would start first. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.