Return to the Electronics Forum | Post a Follow-Up

Viewsonic G800 Monitor Horizontal Widht problems

Posted by deak_imre (My Page) on
Sat, Feb 23, 08 at 10:41

After changed the resolution from 800*600 to 1024*768 Horizontal scanning failed. All picture concetrated in the thin (about 8mm) column in the center of the screen. osd controls working only horizontal width not.
Changed back the resolution bat the same problem.
Cheked and changed the Q303 (2sc4290) strartup ok bat after 5 seconds started to shrink again ,after power down and wait 5 min started up ok dat the same problem after 5 sec

Need some help Pls

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electronics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here