|
Thu, Jan 3, 13 at 3:56
| My wife,s Pro Form Model PFTL39120 developed problems after a power outage.I have checked as far as I know how to, the platform will elevate up and down, which I assume means the power supply board is ok, however the motor will not move via the speed adjustment. I tested the motor windings and they test ok. What do I start checking on the motor speed control board. Any body out there have any experience with these boards, any help or suggestions will sure be appreciated. Iggie |
Follow-Up Postings:
|
- Posted by toxcrusadr (My Page) on Thu, Jan 3, 13 at 12:23
| You might contact the manufacturer and see if you can get a service manual or schematic. Or see if they have a replacement board you can install. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electronics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.