This is the site of a dollshop n my area.....I know that she does supply lots of parts for people. I took a couple of classes and she is very nice and helpful.....She has tons of doll molds and lots of spare parts so perhaps she could help you..here is her contact page... Here is a link that might be useful: Dolls in Wonderland

Hello, my name is Gloria. I purchased my mirrors in 2005. I also lost the finials to one of my Restoration Hardware Grafton style pivoting mirror. I have been trying to replace them since 8/2018 with no luck. I found out that RH changed vendors for their mirrors and the finials are now made as one piece instead of the two piece style. Also, after looking at the pictures above, the frame of the mirror where the finials attach - the part that protrudes and the finial fits over - has also changed. The older mirrors like mine has a nut closest to the frame instead of the round piece and then has the longer round piece, but instead of a slit in the end of the piece, I have a threaded opening for a screw. The first part of the finial has a hole to receive the second part which is the screw. The screw is a large decorative piece that is fed through the finial and screws into the threaded part of the protruding round piece of the mirror. It is used to loosen/tighten and adjust the position of the pivoting mirror. I have a model number for the lost finials and sent RH pictures of the finials I needed as well as a picture of the mirror where the finials attached. I was sent the newer finials that don't fit over the screw on the mirror. You are right about the finials being interchangeable, as I tried the Grafton and the Bistro styles and the part that fits onto the mirror is identical. I inquired about the previous vendor and was told that they were not allowed to divulge that information. I would love to know who it was and contact them. Anyone know who it was? I am going to check into the Pottery Barn pivoting mirrors to see if that finial fits since it is made like the RH mirrors. I'll also take a look at the metal hanging strips to see if that will work, but I wonder how they attach to the mirror and if the part of the mirror where the finials attach are just going to be sticking out the sides looking crazy. If anything works, I'll let you know.

Darlene, got pictures?? I don't know what a 'drain threaded insert' is. And what size, specifically, are the plbg parts??

Oh Rosie, I know what you are saying. I ended up with what we call 'naked doll syndrome'. I was making dolls faster than I could sew the clothing. I finally gave in and started purchasing clothing at the Doll Shows in Orlando. Wish you were closer. I have yards of batisse (sp) thin weight poly/cotton, bought lace by the rolls - 30 - 50 yards at a time in every color it came in, if I really liked it. I finally fell into Joyce Wolfe's fairies. Then the glass cases, mirrors and pieces of coral to sit the fairies on. Have the silk dress kits for her fairies, wings, crowns. As I got older, my dolls got smaller. Sold BIG kiln and molds for larger dolls - around 18 inches. Now I find that I have no interest in the little ones either, have turbo kiln almost brand new. Did do some decals on porcelain blank plates, dishes, cups, bowls, that's a lot of fun. Even did glass decals on tiles for behind kitchen oven, very pretty. Wish we were closer, have I got some goodies you would enjoy. Wish I could find someone in FL with your love of dolls! Hope to remain in contact with you. teacup fairies.