Return to the Home Disasters Forum | Post a Follow-Up

Granite sealer

Posted by gghertz (My Page) on
Thu, Jun 7, 07 at 20:35

Had prefab granite vanity top installed. Granite sealer by "Tile Lab" was applied with sponge and 2 hours latter 2nd coat added. When it dried all streaky and dull I realized it should have been wiped off but never was. If I add more sealer will it react with previous and wipe off shiny (I would need tech to come back with more sealer)? Do I need to use Tile Lab stripper/cleaner and start over? Any other options?

Follow-Up Postings:

RE: Granite sealer

I think Tile Lab is sold at Home Depot. You can check with the Tile Lab website but I would guess adding another coat would take care of the streaking. Just follow their directions.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Home Disasters Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here