|
Sat, Apr 24, 10 at 13:37
| We had a aluminum pation cover installed over 10 years ago. It apparently is too flat and always did leak slightly. This winter with the heavy snow it actually bowed in the middle and pull away from the brick. My Hubby has propped it up and is in the process of getting estimates for repair. Has anyone else had a similar problem and how did you solve it. A new cover is possible but would be a stretch for us at this point. Would welcome any and all advice. |
Follow-Up Postings:
|
| Thecover is inadequate for the region you live in. If you have the ability to reinforce it, do it. If not, replace it with one that does. Ron |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Disasters Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.