Return to the Home Decorating & Design Forum | Post a Follow-Up

 o
Need problem solver for lighting dilemma

Posted by Jaynes123 (My Page) on
Mon, Jul 14, 14 at 13:51

DISREGARD--- already resolved
Thanks anyway-----------------------------
-------------------------------------------------

NOTE HOUSE IS ALREADY WIRED,
Not insultated so rewiring can be done but trying to avoid cost of it.

New construction, elevated with ground floor unoccuppied underneath. Attached is location of for ground flood lights, switch at front and at back of house.

We want them motion detector floods although #1&2 dont have to be motion detector.

Problem is #1&2 are only lights for the pool so when at pool at night, want #1 & 2 able to stay on without requiring motion. Assume motion and non-motion can go on same circuit.

BUT

If 1&2 arent motion, then when we turn switch on so other 5 motions are activated overnight than reg 2 pool lights would end up lit up all night long into the morning

Is this impossible to avoid without rewiring?
Could use a motion light which could manually be switched to stay on without motion.

This post was edited by Jaynes123 on Mon, Jul 14, 14 at 14:08


Follow-Up Postings:

 o
RE: Need problem solver for lighting dilemma

My motion detection outdoor lights switch from motion to non-motion on/off, just by flipping the switch. Flip it once and they do motion, turn them off and on again and they stay on until turned off. Turn off and on, then they become motion again. Would that solve the problem?


 o
RE: Need problem solver for lighting dilemma

UGH thank you.

After talking with too many HDepot 800 departments, see light has ADJUSTABLE MANUAL OVERRIDE.

Not on online description but noted on box although couldve been larger print (excuses, excuses)
Thanks again


 o
RE: Need problem solver for lighting dilemma

:) glad that works for you.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Home Decorating & Design Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here