|
Fri, Apr 8, 05 at 15:17
| We moved, and among the (many)treasures I found was a partially completed cross stich. I had put the needle in it, probably intending to come right back to it, but somehow, it got tucked away, and there are 2 rust spots where the needle was inserted! The background is cream, so a bleach pen probably will make matters worse. Any other ideas? Thanks |
Follow-Up Postings:
|
- Posted by Kathi_MDGD (My Page) on Sat, Apr 9, 05 at 22:01
| Is it in a place where you could put a couple of stitches to cover it??? |
|
- Posted by acraftylady (My Page) on Mon, Apr 25, 05 at 21:39
| I wash my finished pieces with treasure wash. You can find it at a needle work shop and it works very well. Don't know if it will get the rust out but it couldn't hurt to try it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Cross-Stitching Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.