Return to the Crafts and Decorations Forum | Post a Follow-Up

 o
Painting over metal

Posted by gonzyro (My Page) on
Fri, Dec 8, 06 at 21:43

Hello! This is the first time I come in this forum, although Ive been for a while in the Plant place. Please, I need some help...Im planning to paint the metal electrical covers that surround light switches in the wall for decoration. I dont know what kind of paint is good for this. Im new in all the crafts and arts part of life, so I would like to know if somebody has an idea to help me. I saw decorated metal plates for sale in a little fair on the street and Im wondering if I could do it myself.
Thanks in advance!!
Rocio


Follow-Up Postings:

 o
RE: Painting over metal

Hi Rocio, Welcome to the forum. I'd say to use "Enamel" paints for the metal switchplates. It might take three or four coats to cover it all up. At Michael's or Joann's Craft store you will find in the paint section, a Glass medium. You paint the glass (metal) first with this medium, let it dry overnight and then paint your color on. It helps the paint stick better to smooth, non-pourous surfaces. Please post pics of the switchplates when you're done, we'd love to see them.

Sal


 o
RE: Painting over metal

Sal, thanks so much for your message! I have a question...this glass youre telling me...is it like a cover? should I paint the whole switchplace with this? Some of the plates that I want to do will be like lines or squares randomly painted. I sure will post pictures, thanks so much for your encouragment!!!
Rocio


 o
RE: Painting over metal

When painting metal it's good to clean it first with vinegar. It helps neutralize the chemicals that are on it to make it shine.
Make sure it's good and dry before you continue working on it.
You can then use metal primer...I like the spray type from Rustolum. It makes a good base for painting. Again make sure it's good and dry then paint with enamels.


 o
RE: Painting over metal

Yes, the glass medium is like a cover, a film. You have to let it dry overnight before painting on it. I used it for painting a glass jar with acrylic paints. I quickly found out about the acrylic paint not sticking to the glass jar and bought the glass medium. I then learned that enamel paint will stick to glass-nonpourous material. At Michael's or Joann's craft stores, or whomever, you will find decorative painting books by Donna Dewberry. She has a couple specific books just for painting on glass. In the first couple of pages it explains about the glass medium and enamel paint. With enamel paint her rule is to let it set for 21 days before you wash it, or you can bake the glass in the oven and it will harden quicker. Or, you can go to her website "onestrokepainting.com" and check it out there. You can most certainly practice on a switchplate and then wash it off before it dries. You should be able to wash the switchplate off a day or two later actually. If you want to, place your lines or squares on with a "light" pencil mark, then using an appropriate size brush, put on the medium or just the enamel paint. Dark heavy lines will be seen under the paint, especially light colors. Or, use painter's tape and section off what you want to paint. If you use the tape though, let it dry somewhat and then pull the tape up "slowly" or you will "rip" the paint off.

Don't forget Carol's idea of wiping the switchplate down first. That is a very important step. I like her idea of the metal primer also. I'm going to guess you should be able to bake the switchplates once they are painted, don't quote me on this though, I'm really not sure. Maybe Carol will jump back on this post and she can answer that one or someone else who has painted on metal.

Sal


 o
RE: Painting over metal

I have painted a lot of tin cans and other metals over the years for craft projects and I would get a can of spray paint and use it like a primer. Then you can paint over that without little difficulty with craft paints. It will take more than one coat but that's normal if you want to get good coverage. Seal when you are finished with Poly or spray sealer.

GL!


 o
RE: Painting over metal

thank you all very much for your messages! I have to make a list of things that I need and the steps to paint.
Im sure Ill have so much fun!!
Rocio


 o
RE: Painting over metal

Hi All,
I'm new to the board and am so glad to find such knowledgable sources! I was curious about using spray paint like a primer. When you say you used spray paint and use it like a primer, do you mean just any old spray paint? Any particular brand? Does it also serve as the base color for whatever you're painting?
Thanks!
Emilie


 o
RE: Painting over metal

Yes, any old brand. I tend to use the cheap stuff and it works just fine.

I have used the spray paint as the base and I have painted over the spray paint in another color if I didn't have the same color spray paint as I wanted to paint my project.

Before I started using the spray paint, I would spend HOURS painting coats of paint to get the item covered. You still do the 2-3 coats of paint but everything just goes way more smoothly and sticks better.


 o
RE: Painting over metal

Sweets, I would imagine it is flat or satin spray paint, not gloss, right? Luvs


 o
RE: Painting over metal

Gonzyro, I use the spray paint also but I make sure I seal it with a good varnish once I have finished painting. My concern is with metal switchplates. Earlier this year we had to throw away a lot of metal switchplates at my work because the electricians told us there was a danger of electrical shock and they could no longer be used (I worked on a Navy base). So, be careful.


 o
RE: Painting over metal

Hey, Paintingfool! thanks for the advice....Its the first time I hear about the metal switchplates. What do you mean with the "no longer"? Because they were painted or simply they are metal? In my moms apartment we lived for more than 20 years (and counting) with metal switchplates, but of course the building is brick....Do you thing that could make the difference? How about painting the plastic plates? Could that be done?
thanks again!
Rocio


 o
RE: Painting over metal

Rocio, I know nothing about electricity, I just remembered we were told to replace the metal plates with plastic plates because of the safety hazard (our buildings are extremely old on our base). You might be able to get a more definitive answer by calling your local electrician or your power company. Of course, every situation is different, you might check with your local electrician. You can definitely paint on plastic. I even use acrylic paints but you have to put a good varnish over it to keep it from scratching off. I never wanted to go to the expense of buying "enamel or plastic" paints so I just make sure I put on several coats of water base varnish and it worked for me. Good luck


 o
RE: Painting over metal

Hmmm...I'm curious about the metal switch plate thing, too because we have a few in our house. If they are a safety hazard, why are they still making them? Also, if it's the metal and electricity thing they were concerned about...how can lighting be made out of metal?


 o
RE: Painting over metal

Ok, so I came across this thread it has been very helpful! I am painting a metal water bucket and I need some tips. My work is only in spots so I am not painting the entire thing. Any suggestions on masking the designs on a curved surface? Also, in the final varnish stage, should I varnish only the painted spots or the entire thing to make it look even? Thanks for the info already!


 o
RE: Painting over metal

I use copper tubing and washers in some of my projects. How do I paint over them?


 o
RE: Painting enamel over gold leaf

Has anyone ever done this? The gold leaf is on an icon.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Crafts and Decorations Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here