Shop Products
Houzz Logo Print
tngardengirl

Large Styrofoam Peppermint Candies....

tngardengirl
16 years ago

I posted this over in the Holidays forum after someone asked about them - I thought I'd post over here too.

These are very fun & easy to make.

Here's how:

I purchased several round/flat styrofoam disks and printed off the attached template and I might have enlarged it (can't remember). Place template over the styrofoam and trace pattern onto the styrofoam with an ink pen - making sure to press through so the marks are on the styrofoam. I used red fabric paint in a bottle and followed the lines and filled in with the red making sure to alternate the red with the white from the styrofoam to give it the peppermint effect. I also came down the sides with the paint. Optional - you can sprinkle glitter in the wet paint. Depending on how you are going to use them, you might also want to paint the backside as well. You have to play around with the placement of the template so that the two sides match up. Once the paint is dry, cut clear cellophane and leave enough on the ends to "tie" like candy.

Some of mine, I made to look like lollipops by sticking a wooden dowel in one end. For the red stripe on the dowel, I used red shiny curling ribbon and glued it to the dowel.

Hope that makes sense - I do not do well with giving instructions.....

Dawn








{{gwi:1460665}}


{{gwi:1460666}}

Comments (7)

Sponsored
Franklin County's Heavy Timber Specialists | Best of Houzz 2020!