There's a leaf on the far left hand side of the first image of #5, which you have identified as noidhosta-015.jpg and it looks rather suspicious to me, I believe what I see may be signs of HVX. Take another shot of it, it's the leaf @ 9 o'clock. The odd looking green-misted leaves on Undulatas are quite common. Undulatas are quite unstable. #2, marked Francee, quite obviously isn't as labelled. With the plants still rather immature it's hard to say which blue one this is, perhaps Elegans, time will tell. #6 is Undulata, either Mediovarigata or Univitata. Check out Henk Hooijer's webpage for more info. #7's on the tip of my tongue, the memory's excellent, the recall leaves something to be desired. #8 looks to be correct as Francee. May I suggest it would have been an easier post to answer if it had been split up into several smaller posts.....

It's really hard to see anything but I think I can make out something that looks like a wood rush of some description - Luzula species. They are perennial so they will have been there a while - you just noticed them because they're flowering. Further than that I can't help you. A close up of the flower is vital to id them.

Your feedback has been very helpful! Here is the updated vanity design. There are 2 open issues at this time: 1) I'm having a problem with the placement of the sconces because the bathroom is gutted and tacking up pretend sconces on the wall might not be working. I am tempted to place them higher than the overwhelmingly recommended 64" - 66" (light source) from the finished floor. I think it's sort of an optical illusion making them seem too low, and I'm worried I'll make a mistake by hanging them too high in response. I am 5'5" and DH is 5'9", so I have them drawn in at 66" at the light source (top of shade at 69" and electrical box at 58"). They are Bryant single sconces (see pic). I have to decide the height now bc they are going to be installed in the mirrors and the electrician has to set the boxes. 2) Depth of the cabinet that is sitting on the counter (the tower): I have it drawn right now as 12" deep still bc it's 24" wide. I was afraid that if I make it shallow (such as 9"), it might look like a big Cheerios box up against the wall. But the good news here is that the cabinet maker is going to build this after the vanity is installed, so I can mock something up with cardboard later to decide. __________________ I'm not a designer, so please be as gentle as you have been thus far. ( : Starting from the floor, this is where I'm at right now. (I am giving the "homeowner numbers." My great cabinet maker will make all the teeny tiny measurements work out; he built my kitchen so I trust that): __________________ Overall it’s a 96" wide vanity. There is a wall on the left side. On the right side there is no wall. The cabinet construction will be frameless, full-overlay. The door and drawer front style will be like my kitchen (shaker with a bevel). There will be some kind of pretty feet or trim on the bottom, tbd later. End cabinets are 36" wide and the middle drawer cabinet is 24" wide. The middle part will be bumped out about 2.5". Each end cabinet will have a Kohler Ladena sink which is 18” x 12” (inside). The middle drawer cabinet will be divided into his and hers and will have 4 drawers for each side, the bottom ones being bigger, about 10" tall. We might change this to have 2 bigger drawers each side, so would end up with 3 drawers on each side. The countertop will be 2cm marble, laminated with a pretty edge, tbd later. The backsplash will be 6” marble. __________________ Tower details: The tower box will go up to the 8’ mark. At the bottom, there will be a panel because there will be 2 outlets installed there. Either that or my cabinet maker may have a clever idea to use that space. There will be about a 36” high cabinet in the tower, followed by about an 18” high cabinet at the top. The top cabinet will have a glass front and 1 light. Right now it is drawn as 12” deep, but I can change that because he is building this after the main vanity bottom is finished. __________________ So, for mirrors, we will do 2 36” wide x about 53” beveled mirrors above the end cabinets that will not be trimmed. The mirrors will fill the whole space. In the mirrors we will install 4 Bryant Sconces. They are 14.25” tall, with shades that are 4” wide at top, 5.5” wide at bottom and 6” tall. The mounting plate is 4” diameter. __________________ From the top of the tower and mirrors to the ceiling: The wall will fur out to the depth of the tower, and there will be some kind of pretty trim and panels to tie everything to the ceiling. Underneath this fur out area there will be 2 lights, one above each sink. My cabinet maker and electrician said they can be installed flush. __________________ Here is my drawing. If this image is hard to see, let me know and I'll scan it instead. Please help me with the 2 dilemmas: placement of sconces (need to decide today) and tower depth (I have some time to decide this). Thank you!!

It would help, although you'd have to cover it with something if you want to put tile over it. We built a storage spot in the basement of our house. I found a book on root cellars that helped a lot: location, ventilation etc.