That is the one thing I have noticed since scouring the net and asking everyone and anyone in the know their opinions on who makes the most well put together laptop. It seems that many folks are extreemely loyal to one particular product or brandname, but one brandname doesn't seem to be conclusive over the other. The Imac sure has its very loyal following, as well as Dell and Toshiba and, another brand rapidly picking up steem is HP, especially their DV6000 and DV9000 lines. I am beginning to conclude that at this point, figure out exactly how much of a laptop you need and can afford, paying particular attention to Size of Hard Drive, How much Memory (RAM), and third, how much graphics card, and lastly and most important, the CPU. I have concluded that the duel core processor is important, as it is essentially two processors stapped together, and the OS uses one for certain functions and the other for certain functions, and most importantly, only one is being used and powered when both are not needed, saving battery power and overall electric consumption. Another rule of thumb, to save money, get the base core duo (1.60GHz, I believe), and skip the upgrade on the CPU and get 2G's of RAM, as your CPU runs out of cache space for storage, it will draw from Ram, and adding RAM is much cheaper than adding a high end CPU. Bottom line, I'm waiting for some hot sales. Another thing to think about is size, and yeah, folks, size does matter... Most of the 17" models that I've tried out in the stores just seem too damn big and heavy, especially if your going to use the thing as a LAP top... it's just too damn big for my lap, and I have a big lap at that... the 12" is just too small, especialy for viewing movies, etc. That's the one thing that turned me off from the DELL XPS 1200... hot looking little machine... just too small. 14-15" seems just right for my taste. It seems to me that all these machines (Toshiba, Dell, HP and many others) are all beginning to become clones of one another. Seems they are are made in China nowadays, and no one has yet to convince me overwhelmingly that one is better than the other...

My gut reaction is that Verizon was too lazy or cheap to write the drivers for their product. As I read it, the Multi-WWAN driver is for devices that have wireless broadband hardware built-in. I'd download the HP Multi-WWAN driver for a similar mini (make sure you get the matching O/S). Either the driver is going to install or it's going to balk at the lack of necessary hardware. I'd bet that even if it balks, the drivers get installed anyway. If that doesn't work, I'd call Verizon and ask them to support their product. You're paid them for the device and continue to pay them for monthly access. HP Mini's are quite popular so you can't be the only person having this problem.

jean001- I understand what you're relaying about your conversation. However, if it's backwards compatible to XP, it means that it works with Vista. Now if he is telling you that he can either have it set to handle Vista connections, or XP and Win7 connections, but not all of them at the same time, maybe that's so based on some odd configuration he has set up. I have my own $60 wireless router running four computers (and a Roku box and a printer): one computer is XP, two are Vista, and one is Win 7. They all worked immediately after I put in the keys for my security settings, and I did nothing to configure any of them specifically. I've never had a problem connecting. And I have friends who visit and tap into my system using both PCs and Macs and they have no problems either. If you don't want to question your guru any further, that's your call, but I'm still not buying his story.

REplaced the hard drive - uh-oh. Your legally installed Windows system was on the old drive. When the replacment drive was installed, the existing system needed to be transferred to the new disk (if possible). This can not be done by a simple copy. An image of the old disk must be transferred to the new disk. Software such as "Copy Disk" is used to do this. If the old drive was failing and could not be effectively accessed, then the computer system has to be rebuilt by reinstalling the sysem from your original CD and it needs to be 'activated' from the MicroSoft site. Contact MicroSoft's web site for instructions. If you do not have the Windows original software disk, then the store from which you bought the computer may have a legal copy and should be able to reinstall for you. Look around in the material that came with your computer (when you bought it). If you do not have the Windows software, is there a "recovery disk"? Look for instructions about how to use the recovery disk. This may save you. If you can not find a way to resolve this issue, then you may be faced with buying a copy of Windows and starting over. This points out the need to make a recovery disk soon after you get a new computer.