Right...I now have a thumb drive with today's versions of .exe files for Firefox, MWBAM, SuperAS, CCleaner, Avast, Avast Uninstaller, CCleaner, Win Patrol and Revo. It'll be 2 weeks before I can do this computer clean-up. Doing this all off-line, should I uninstall old Revo first, then install current Revo and use that to uninstall other programs one by one? And run new CCleaner after each uninstall? Any flaws in this plan? Appreciate any advice! Regards, Shax

My niece is almost 50 and she said in no uncertain terms, no one will touch it. We found one model that was being replaced with a new model and got it for $399. I think her daughter might look it over just to see what kind it is, but she has uncommonly good sense. Her nieces and nephews are the problem, because they do things their way and that is the right way. They wanted her to buy protection, free stuff is not good enough. She took my word that is was fine. Setting up this PC was harder than usual, I think it was because I had someone looking over my shoulder, but some the things were very different. I forgot spyware blaster, will do it the next time we meet. I did the other stuff except for CC, I didn't want her to get into the registry. I have a list explanations and instructions on my PC and will print one off for her. She didn't want a password to turn on her PC and I agreed with her since she is the only one who will use it. When I did that one day the PC would not accept my pass word. HP would not help me either.

FYI everyone - the top of the sink is just short of 34 1/4". My contractor said the countertop will be another couple of inches. So it all sounds standard. Too bad I'm not!! davidro1 - thanks for putting my mind at ease re. how difficult the work is! Cheri127 - not sure I want to pay $300-$400.00 more. Hmmm... Nutheroikie - thank you! :) I love the faucet, still (was so worried I wouldn't love it when I got it in person but it's grand). bayareafrancy - I'm 5'6 too and my bellybutton is 5" above the lip of the sink. Haha. Darn! ;) Thanks for the shims idea. Yes it will be painted. Kind of a pity though cause due to a door that can be swung open to hit the cabinet doors/faces, I feel forced to go with a higher-quality/harder wood for the faces and doors (inset). That means more money...but it seems a pity since the they'll be painted! But I don't think unpainted wood would look good with painted uppers. I don't want an upmounted sink either (no way - I want to be able to clean more efficiently for the first time in my life!). As for the faucet parts, they are interchangeable (within the same company of course) and the company that makes it is Jaclo: http://www.jaclo.com/products/sub_category?cid=123 They do have a gooseneck that isn't quite so high, but it doesn't come with the built-in sprayer as this one does - and I really like having a sprayer but no holes in the countertop. :) willis13 - interesting. I got my 8 year-old to measure the height from the floor to my elbow and while I'm not sure how well he measured, it ended up being 42" so after subtracting 6" it's at standard height! But the problem isn't the counter - the problem is how low the sink is. But the grid might help a little. I think I'd be very happy if everything were up an inch or two. I'm not a tall person (though my husband is something like 6'1 1/2) but again, both my husband and I have tall torsos. I'd look really normal if I walked on my hands I think. ;) I'm really stuck! I don't know what to do. Now's the time, and yet it will cost more and will postpone things more and maybe I'm being too picky. Or not. Shoot.

Mike, yes. They have to give me the wired ODT sensor so I can lock out the heat pump. This was discussed between them and I several times before I signed on the dotted line and they had assured me this was possible. So as far as I am concerned they have to deliver on it even if it required ODT sensor. I just found another issue as I dig into this mess. I was trying to understand the fan behavior. In particular, from the sound it seemed the fan always ran at one speed. I was puzzled and digging into the thermostat menus, I confirmed this. The fan was either 100% or 0% speed. And it runs for additional 1 minute or so after the compressor shuts off (cooling fan delay). I found this odd - why did I buy a variable speed blower and why was I sold one. I mentioned this to the dealer and could get a satisfactory explanation. And then I checked the install guide - and it was there (see attached, in particular the graph and the table). There are four settings one can choose from. To really benefit from the variable speed the jumpers on the inside unit need to be configured in so called enhanced mode (option 4 in the table) where the fan starts at 50% speed and then to 80% for about 1 minute (fast cooling); the fan then stays on at 80% for 7.5 minutes (dehumidification); if necessary, ramps to 100% to get to the set point temperature and stays there as long as required, and ; ramps down to 50% and then 0% over three minutes to extract extra cooling efficiency. Well, this is not how my system has been configured. Mine is configured as option 2 in the table - 100% fan speed, followed by 1.5 minute delay - there is no variability of fan speed that can kick in. I have call in to my dealer...