That's a good question... :-) Ours will probably be about 8 months from when we started with the foundation. Maybe 9 or 10. But the main difference I see is that we are 2100 main floor, 2100 lowel level completely finished, 1350 upstairs completely finished and about 1200 wrap around porch that has electrical and plumbing and enough lights & speakers on it just like it was a house.... but I know I will love it when we are using it but I looked at it last night and thought it is almost a house on the porch. Rain has been one of our biggest issues. Rain, rain, and more rain. I would also think that by building your own, you could make decisions pronto, whereas some things get delayed until I can give an answer. They just move on to something else until they get an answer, but when I get there, they have to explain it all to me, explain all my options to me, check on this way or that way for me, etc. Electrical has been our biggest thing. 5 miles of wire seems to take a bit of time.... :-) I have to go over with him where I want this or that. Can you move this or that, whereas building your own, you just know. I dont know why it takes so long, because everyone is working their best it seems. I am very happy with everyone. But I will be very VERY happy when it is all done.

Hi! I'm doing soy candles for the first time and tryed CB-135 with US ECSENTIA chocolate fudge FO (10%) The contaminar have 3" of diameter,. The candle looked lovely: smoth surface and very fragrant. 24h after, I Light the candles ( I make 3 diferent wicks: eco wick 4 ; eco wick 6 (following wick Guide) and small woodwick from 4CANDLES. Wick 6 did made a nice melt pool and the wick 4 also get the edges but not so quickly. The woodwick make the candle tunneling. The scent was perfect and I was confident. After reach a Good melt pool I let the candle burn for about 3 hours. When wax resolidify, There was an awful brown strip on the three candles on the place of the melting pools. Next day lighted the candles again: very poor scent, the melting pool get much more time to achieve but did with wick ECO 6 and ECO 4 and did not with woodwick. The colour of the surfaces get much more dark even. I try the same wax with diferent scents this time: 2 from 4candles and 1 from scent perfique. now I have to Wait 48h and then light then to see what happen. If someone did already face this problem, please help me.

I am going to get on my design high horse and probably offend some people who personalize discussions about design theory, because I am good at annoying people in this way. First, I think almost anybody who buys a post war house in almost any part of the country that was not built as a completely custom house is probably going to end up with a lot of choices in houses that include a patch of brick or stone on the front facade and plain siding or plainer brick on the rest. Almost anybody who builds a new house in a development or subdivision or home owner's association is not only going to face the same, thing, but in addition are not going to be allowed to leave the stone or brick accent off even if they want to. The element that was originally used as a budget cutting device is now "important" to the design and consistency of the entire development. The consistency of materials of the individual house is no longer important, but the inconsistency of materials and how they are used must be consistent throughout the neighborhood. The building a house forum is full of questions about how to tack the stone or brick onto the front of their houses even if they don't want it because the guidelines say the house must be 10% stone and 30% brick on the facade. Second, I don't think there is anything the matter with vinyl siding. I don't think there is anything the matter with any particular building material. Frank Lloyd Wright built beautiful houses out of concrete block. There's nothing the matter with building a plain rectangular house with plain modest materials that go all away around the house and calling it done. But as a culture we have been convinced that this is cheap looking somehow. But if its three sides of a rectangle with a convoluted elevation on the front including three or four different building materials, it's "pretty". Third, if you are building a custom or semi custom house, why not build something that you can afford to finish the same on all four sides? We are also in a culture where people are pressured into feeling it's necessary to take everything to a level that we can just barely afford it. And who is that impressing? Some random stranger may be impressed by your house driving by, but what about the people who get inside, and see that there's barely any furniture, and many of the rooms are cheaply detailed drywall boxes. I understand if you live in a HCOLA that it is easy to be house poor, but whats the point of a 4000 square foot house when you are entertaining people on card tables. Sheer volume isn't everything. Should you apologize to friends because the back of your house is vinyl? I dunno, but think about where you are putting friends and family. There is this fancy facade out front that no one ever spends any time in front of. They are escorted to the back yard. There are $1M townhouses here that have stone and brick facades with genuine copper bays and details on the front. The end unit has plain stucco on the side that faces a side streets. The backs are vinyl siding (you can easily see all three materials together.) So some stranger sees the fancy front of the house where the real friends are taken out back where they sit on crudely built pressure treated decks next to vinyl siding with all sorts of PVC pipes and vents and such sticking out all over with no concerns about esthetics, or quality, and it's all right at eye level. As a culture, maybe we should apologize.

Do we get any more hints? Gas or electric? Brand? Can you define "doesn't work" better? Won't heat (could be a bad element)? Error code (check manual...)? Heats to wrong temp (may need calibration or a new sensor)? No display (electric issue)?