Printer difficulties.

10 years ago

I have a LexmarkÃ¢ÂÂ¢ Pro 205 printer connected (wirelessly) to a DellÃ¢ÂÂ¢ Inspiron desktop computer.
The LexmarkÃ¢ÂÂ¢ stopped printing but continues to copy.
I re-installed the LexmarkÃ¢ÂÂ¢ but the test page would not print.
It shows, "Printer cannot communicate with the computer".
In the control panel section of the computer, it shows, "Printer has been successfully installed".
Any idea of the problem and/or solution?

Sort by:Oldest

Comments (10)

PKponder TX Z7B
10 years ago
There should be a network setup wizard on the printer. Run that again.
ronalawn82
Original Author
10 years ago
pkponder, I did as you said.
Now when the desktop is switched on, the printer is "awakened".
The "Control Panel" indicates that the printer is installed.
When I sent a "Word" document to print, the printer went through its routine and produced a blank page.
Copying still works fine.
I will make some time this weekend to work on it some more.
Thank you for your response.
Related Discussions
Start a magazine?
Q
Comments (16)
My newsletter is called Raleigh Garden because it is focused on the Raleigh NC area (hence the Triangle in my web name). This area is a goldmine of gardening goings-on and the "who's who" horti-list just keeps getting bigger and bigger everyday. I wanted a way to tap into all that but in a low key manner. So I designed a tabloid that was intended to be mix of Southern Living meets The National Enquirer. It flew, people loved it, people CALLED ME to place ads in it, people with credentials wanted to submit articles. I turned them down for the moment because my subscription list was soooo small I didn't want to waste anything good on my first wobbly baby steps. The problems are not designing a winning product (at least for me), the problems are not production (expensive but do-able), the BIG HUGE monster problem is distribution. Garden Centers don't care to add one more product to their inventory unless they are dealing with a fancy schmantsy sales rep - or - we are talking about a product that is gonna make everybody stinking rich. To my face they were thrilled to see someone doing what I was (am) doing, but very few of them bought in to the project. Faced with tiny sales I downsized the publication to a simple Kinko's photocopied newsletter and focused on putting out a calendar instead. Store managers will tell you they would love to carry your product until you show up with a box full - then suddenly they are less than interested. I've heard everything from "we already have an in-store newsletter and don't want the competition" to "it's not a magazine or a book, so I wouldn't know where to stock it" (this from the bookstore that previously stated they would love something local). The best was the downtown garden center that said they would carry it but that they doubted it would sell. I hand delivered and set up a small display and explained that they would be on consignment and that I would be back in one week to restock. Upon returning the buyer met me at the door and gushed "we've sold out! I can't believe it!". I explained that I had plenty on hand in the car; how many did she want? She acted confused and then said, Five, bring me five. She had just sold 24 in about 7 days, they are on consignment and have so far cost her nothing, and she only wants five. They are still my best customer but I realy have to babysit them every month. The company on the internet that I use currently as my printer is PSPrint. They will print in small runs and the price is realistic. I will probably stick with them forever and just give up on the local printers. It takes too much time to chase them down only to be turned down in the end.
...See More
Dell Printer V515w
Q
Comments (6)
my jaw just dropped because uninstalling and reinstalling the printer is infinitely easier than deleting a spooled print job :-) go into your Printers and Faxes or Printers and Devices folder, right click the printer and choose delete (XP) or Remove Device (7 and 8). Unplug the USB cable and restart Windows. Plug the printer back into the computer and follow the installation wizard. If prompted to pop in the driver installation disk, do so.
...See More
any one having problems
Q
Comments (14)
Have you tried to CC&P the recipe to another form like email or a diary and then print? That should work even though it is an extra step. I think something changed here at GW. I could not get pages to move for a while and others had difficulty accessing GW the same day. Now, even with my blocker on FireFox, I am getting these big green leaves that flutter from the top ad banner and settle into the sister ad at the lower right side of the page. I can't click to move the page until the leaves flutter down and land in the other ad. It was cute at first and not is very annoying.
...See More
Rebates Bouncing
Q
Comments (7)
I was on the Canon (camera) web site earlier today, because I'm getting a Powershot SD1100 IS for my hubs and I wanted to see what OEM accessories are available. On the home page, towards the bottom, there is a link for IMPORTANT REBATE INFORMATION. I clicked on the link, hoping to find that I can get a rebate on the new camera... There's a second "click here" link, which takes you to a page that says this: Important Rebate Info November 14, 2008. Dear Valued Customer, This is an official message from Canon U.S.A., Inc. The third party rebate processing company that was responsible for processing rebate claims and issuing mail-in-rebate checks for Canon-brand printer and video products (along with many other products of a number of other companies) filed a Chapter 11 Bankruptcy petition earlier today. The funds provided to them by Canon U.S.A., Inc. (and other companies) apparently are no longer available to satisfy the rebate checks such company issued on behalf of Canon and other companies. Regrettably, as a result, you should not cash the refund check you recently received for such products, as it likely will bounce. We apologize for any inconvenience, delay or confusion this may cause. We are doing everything in our power to promptly rectify the situation. Accordingly, we request that you take the following actions: ÂIf you are holding or receive a rebate check for printer or video products which is dated on or before November 14, 2008, please do not cash the check, as it may bounce. Please look for updated postings on the Canon U.S.A. website on or about November 18, 2008 for further instruction on how to exchange your check for a new check that you will be able to cash. ÂIf you have not yet mailed in your rebate claim materials, please hold such materials until you receive further instruction. We are making new processing arrangements, with a new mail in address. Please look for updated postings on the Canon U.S.A. website on or about November 18, 2008 for further instruction on where to mail your rebate claim material and how to exchange your check for a new check that you will be able to cash. Check our web site early next week for further instructions and contact information for any questions you may have. Again, please do not cash any rebate checks for printer or video products which are dated on or before November 14, 2008, as they may bounce. We are committed to ensuring that you receive your refund as soon as possible and that you will continue to have full confidence in Canon U.S.A., Inc. We apologize again for any inconvenience. Sincerely, Canon U.S.A., Inc.
...See More
PKponder TX Z7B
10 years ago
I briefly Googled the model number and error. May be easily resolved by reinstalling the printer on the computer that's throwing the error. Just go to the website and get the most updated driver for your model, delete the printer from your printers and faxes or printers and devices folder and start the install. Follow along with the prompts until it completes and ask for the test page at the end. You'll need to use a USB cable temporarily to complete the install and then you can go wireless.
ronalawn82
Original Author
10 years ago
pkponder, I tried doing as you suggested; and to my chagrin I cannot uninstall the program for the X5100 - the printer that I replaced years ago.
A test page is in queue apparently since 2011!
The message is displayed with all four USB ports free.
The display assures me that the program will uninstall as soon as the print job is completed.
Since I have no way of printing the test page, I am stuck.
What now? Something seems wrong in the computer itself.
Please!
PKponder TX Z7B
10 years ago
I can help with that too.
I will assume that this is Win XP
Open a command prompt. Click Start and then Run, Type cmd and press Enter
confirm that you are at a prompt that reads C:...if you are at C:\Documents and Settings\your user name..you simply need to type 'cd .' without the quotes, tap enter and repeat the step until you see only C:\
Type in cd system32 and press Enter
Type in cd spool and press Enter
Type in cd printers and press Enter
Now that you are in the correct directory, type the commands
net stop spooler and press Enter
del *.* and press Enter (there is a space between del and the first asterisk)
You will get a message asking that you confirm...press Y for yes
Type net start spooler and press Enter and you are done

This will clear the local printer queue and should allow you to delete the printer.

Note***this command will work in Windows 7 or 8 also, but the path to find Run (and the command prompt) are slightly different.
owbist
10 years ago
I believe with Windows 7 you simply tap the Start button then type cmd - this will appear immediately above the start button, hit Enter

Windows 8, be on the start page and type cmd - you will see it in the top left corner, click on it. Done.

Either way, once done follow the rest of Pam's suggestions.
ronalawn82
Original Author
10 years ago
pkponder, I have to print your response (from another computer, of course) and follow your instructions from that.
Many thanks to you and owbist.
Ron.
PKponder TX Z7B
10 years ago
How's it going Ron? I work full time and try to check in at least once a day in case you get stuck or have questions.

Pam
ronalawn82
Original Author
10 years ago
Hello Pam, I hope that you will yet check today - because the news is all good. I followed your instructions but had to 'deep clean' the printer head before the test page printed faithfully. I just now finished.
My problems with digital hardware and software are all 'operator related'. There was one single case of 'equipment failure' - the fuse on the power supply cord of my GPS went out.
Let me invite you and owbist to bring your plant and gardening questions over to the plant forums.
And once again, thank you both for your time and attention.
Ron.
PKponder TX Z7B
10 years ago
Great news! I love my Texas Gardening forum :-)

Printer difficulties.

Comments (10)

PKponder TX Z7B

ronalawn82
Original Author

Related Discussions

PKponder TX Z7B

ronalawn82
Original Author

PKponder TX Z7B

owbist

ronalawn82
Original Author

PKponder TX Z7B

ronalawn82
Original Author

PKponder TX Z7B

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

Printer difficulties.

Comments (10)

PKponder TX Z7B

ronalawn82Original Author

Related Discussions

PKponder TX Z7B

ronalawn82Original Author

PKponder TX Z7B

owbist

ronalawn82Original Author

PKponder TX Z7B

ronalawn82Original Author

PKponder TX Z7B

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

ronalawn82
Original Author

ronalawn82
Original Author

ronalawn82
Original Author

ronalawn82
Original Author