Return to the Cleaning Tips Forum | Post a Follow-Up

Granite Cleaning: Free Advice from a Stone Care Professional

Posted by Stonexpert (My Page) on
Sat, Dec 25, 10 at 17:49

The easiest is always to have someone else do it. If you are stuck with the job then no matter how sophisticated or expensive the product(s) you use the techniques are very similar. Dish soap is still the best, yes, the same stuff you use everyday for the dishes you eat from. Dish Soap is economical and plentiful, simple and safe to use, and will get the results you seek.
Basic Cleaning:
A dish-rag soaked in hot sudsy water should be used to saturate the granite surface. Allow a few minutes for the hot soapy water to work its magic. Scrub with same soapy rag shortly thereafter to remove any build-up or stubborn grime followed with a rinse or two of hot water from a soap-free rag.
For Heavy Cleaning:
Further agitate the soaking-wet surface with a coarse cloth or mildly abrasive scotchbrite style pad, rinse as usual.
After any cleaning regiment and after your stone has dried some streaking may still remain. Streak-free dish soaps seem to minimize this. Use a clean cotton rag, microfiber cloth, or white color scotchbrite pad to buff away cleaning product residue that remains.
Maintaining Polish:
Periodic buffing when surface is dry with extra-fine(000) steel wool followed with a slightly damp clean cloth to pick up steel wool particles left behind. A spray and shine liquid wax like Zep buffed with a clean cloth will add some glossy brilliance.
Granite Myths and Truths:
To Seal Or Not to Seal?
If water does not bead on the surface and instead slowly absorbs and produces dark areas which a hair dryer will remove then your stone is not adequately sealed.
All untreated granites will absorb water and oils at different rates and are vulnerable to staining no matter how dense, this includes Black Galaxy, Ubatuba, Absolute Black and similar dark colored stones. The good news is that granite staining is not permanent and can be reversed. Even better still, granite sealing technologies are readily available which penetrate your stone to protect and prevent these problems from occurring in the first place. Your granite may have been factory epoxy-coated from the slab producer which will prevent sealers from penetrating. The finished edges and underside will still be susceptible to absorption and should be sealed. Sealers differ from manufacturer to manufacturer, as do their quality and molecular ability to sync with your granite's unique porosity. For best results a knowledgeable professional in your area should recommend the appropriate sealer for your particular stone and perform the initial sealing as well as successive sealing or instruct the homeowner in how-to applications.
Granite Wannabe?
Not all granites are granites. All hard igneous type stones are generally grouped with granites which should rightly contain adequately high percentages of quartz and certain minerals to be considered a true granite by definition. Special considerations to be applied for special stones outside of the granite family in terms of cleaning and preservation methods.
Granite Vulnerability?
Vinegar, lemon juice; acids, as well as corrosive alkaline agents will not harm your non-coated granite. Granites are generally chemical resistant and even in extreme exposure can be easily restored to their original state. This is why granite is the first choice for monuments and commercial building exteriors.
Please note that some granite processors now coat their granite slabs with epoxy/urethane sealing technologies which may require special cleaning and maintenance considerations.
Enjoy Your Natural Granite!!

Follow-Up Postings:

RE: Granite Cleaning: Free Advice from a Stone Care Professional


RE: Granite Cleaning: Free Advice from a Stone Care Professional

This is great information! Thank you so much!

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Cleaning Tips Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here