|
Mon, Jun 15, 09 at 10:09
| I've had good luck with making my own bottle brushes. Use a coat hanger the desired length and bend the end over a piece of cloth the desired lenght and or thickness. Clamp this down tight with pliers. You can even use a thinner wire for those very small openings Really gets into corners well. |
Follow-Up Postings:
|
| Welcome to GardenWeb, Bottlesrock! I do the same thing, but I don't bother to connect them. I push the cloth into the bottle, use the coat hanger to swish it around, and then go fishing for it with the bent edge of the hanger. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Cleaning Tips Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.