|
| Hi, I am a polymer clay artist. I see that there were questions that have gone unanswered so if you want any answers just ask and I will do my best to help.
~~Elaine~~ |
Follow-Up Postings:
|
- Posted by bettyn_gardener (My Page) on Sat, Aug 11, 12 at 13:34
| Elaine - your offer could not be better timed!! I have a couple of questions. I am making large beads and using Sculpey Ultralite as a core bead, baking it and then putting on a veneer of Premo. I'm finding it hard to get a good smooth surface on the veneer so I'm spending a lot of time sanding ... Any thoughts on getting a smoother surface?? And I am also experimenting on image transfer using Tshirt transfer paper. I first tried burnishing, baking for 7 minutes, removing the paper and then baking for another 7 minutes. Even with diligent burnishing, I didn't get the entire transfer to stay on the clay when I removed the paper. Next, I tried placing the transfer on the clay, spraying it with alcohol and rubbing the paper off the transfer image. This was more successful, but the surface was rough when it came out of the oven, I baked it for 15 minutes - too long?? I am aiming to make pendants - I insert eye pins, so there has to be some thickness to the clay. I am using Tailor Iron-on Light T-Shirt Transfer for ink jet printers that I got at Joann's. I am wondering if the issue is with the paper or the methods I'm using. If you have any insights I would be so grateful!! Betty |
|
- Posted by cleocrafta (My Page) on Sat, Aug 11, 12 at 20:52
| Hi Betty, I'm a polymer clay artist & teacher. I suggest you try the transfer method using gin and laser print copies. This process is easy & frugal to do. Donna Kato teaches a free "step by step" tutorial on her site CraftEDU. Good Luck, Cleocrafta |
|
- Posted by bettyn_gardener (My Page) on Sun, Aug 12, 12 at 12:51
| cleocrafta - I looked at Donna Kato's free tutorial - she used water. What's the advantage of using gin? Would rubbing alcohol accomplish the same thing? Betty |
|
- Posted by ElaineInNJ (My Page) on Thu, Aug 16, 12 at 1:40
| Hi Betty, I don't bake my bead cores first, I shape my core into a square and put my veneer on then roll the bead in my hands to make them as round as I can, put the hole in then bake them. Try it and let me know if you find it easier this way. I am on my iPad and couldn't get Donna's tutorial. I will take a look at it tomorrow with my laptop and get back to you. I took a class with Donna and we did use water for the transfer. She provided us with the pictures and I believe they were laser prints. Elaine |
|
- Posted by bettyn_gardener (My Page) on Thu, Aug 16, 12 at 12:07
| Elaine - Thanks so much for responding! I did get the laser transfer to work - it's much better than the ink jet transfer using T-shirt transfer paper - so it's worth the trip to Kinkos! What clay do you use for your cores? I like using the Ultralite - makes a huge difference in the weight. It's VERY soft, kind of like sculpting with marshmallows, so I don't think I could get it to hold its shape for a veneer. I did find a tutorial online for baking a round cut out on a light bulb, then gluing two of them together, making a hollow lentil bead. I'm going to try that today. Lucky you! I can imagine that Donna's class was terrific! Betty |
|
- Posted by ElaineInNJ (My Page) on Thu, Aug 16, 12 at 12:07
| Hi Betty, I just checked out Donna's transfer tutorial, it's exactly what she taught in the class that I took with her. The transfer for my project came out great, I get complements on it all the time. I have never tried the transfer papers so I am no help there. Here's a tip for using eye pins for your pendants. Before inserting it into your pendant, make a loop on the end, add a tiny bit of clay into the loop then insert it, this will make sure the eye pin does not come out. I got this tip from Jana Roberts Benson at a class she gave in Philadelphia a few months ago. (I hope I spelled her name right). ;o) I want to say thank you to Cleocrafta for mentioning Donna's site. Elaine |
|
- Posted by bettyn_gardener (My Page) on Thu, Aug 16, 12 at 16:33
| Elaine and Cleocrafta - Thank you!! I appreciate the knowledge and experience from both of you and also to have someone to chat with... I'll let you know how the light bulb thing goes... |
|
- Posted by ElaineInNJ (My Page) on Thu, Aug 16, 12 at 18:01
| Hi Betty, I usually make smaller beads so I don't really have to worry about weight. I use the bead roller for my beads. I know what you mean about the ultralite being so soft and maybe not holding it's shape for the veneer. I think I may try it just to see if it would work. I'll let you know. You have me thinking of the necklaces I made recently, they are very heavy, so I think I will use the ultralite on my next one. The only problem I see would be how to color the ultralite. I'll have to think on that. I'm glad you got your transfer to work. Elaine |
|
- Posted by bettyn_gardener (My Page) on Thu, Aug 16, 12 at 19:25
| One thing that's nice about baking the core first is that you can apply a very thin veneer on the bead and it doesn't affect the weight... I was planning on trying a makume gane pattern using gold or silver leaf - then I remembered that I have gilder's paste. Do you think that would work?? I'm heating up the oven now for the "light bulb bead"... I hope it works! Betty |
|
- Posted by ElaineInNJ (My Page) on Thu, Aug 16, 12 at 19:50
| I don't know what gilders paste is. I have used both silver and gold leaf. I sure your "light bulb bead" will be great. Elaine |
|
- Posted by bettyn_gardener (My Page) on Thu, Aug 16, 12 at 20:36
| I'll just experiment with it and see what happens. That's half the fun anyway! The light bulb bead came out of the oven mostly fine. There appears to be a tiny bubble in the laser transfer, but it's in part of the image that almost looks like it belongs there... now I need to do a little sanding and super glue the two halves together. Here's a link to the tutorial if you want to check it out. Betty http://www.polymerclaycentral.com/cyclopedia/flyingsaucerbead.html |
|
- Posted by ElaineInNJ (My Page) on Sat, Aug 18, 12 at 14:42
| Hi Betty, I have made these a long time ago, but I didn't use glue, I used Kato liquid. Another way to put the two pieces together would be to put a narrow snake of clay between the two halves and bake it. I would love to see a picture of your piece when it is all put together. Elaine |
|
| Elaine, have you ever made memory beads, flower petals incorporated into oven-bake clay? I'm trying to learn to do them but am having difficulty with the flower petals not staying the true color. Please let me know if you can be of help, I would greatly appreciate it! |
|
- Posted by ElaineInNJ (My Page) on Sun, Sep 30, 12 at 13:37
| Hi Kessy, I have never made memory beads but I googled it for you. I hope it helps. Sorry I didn't get back to you sooner but Wed. I was traveling to Florida, then I wasn't online much visiting with family and spending time with the grandkids, then working on my beading for a coming up craft show. Here is the link: http://www.ehow.com/how_7685929_make-clay-flower-memory-beads.html Please let me know how you make out. Elaine |
|
- Posted by ElaineInNJ (My Page) on Sun, Sep 30, 12 at 13:59
| Kessy, I went back to the link and I'm not sure if that is what you are looking for. If you want to place petals into the clay, the way I would do it would be to place the petals on the clay, cover it (I would place card stock on the clay and place a small ceramic tile on top to prevent the petals from curling) then I would bake it. After it is baked I would put a very thin layer of translucent clay on top to preserve the petal. This would be more like a pendant than a bead. When I get back to N.J. I will try this and see what I come up with. I will let you know how it comes out. Elaine |
|
- Posted by ElaineInNJ (My Page) on Sun, Dec 16, 12 at 14:35
| I just found this video tutorial for memory beads, I hope it will help. She did mention that the color of the flower does get darker when they are dried. http://www.youtube.com/watch?v=rKNkMfmknp4&feature=share Elaine |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Clay and Ceramics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.