|
Thu, Jul 19, 12 at 15:17
| Does anyone know what the cost of a concrete slab would run (by square foot)?
One contractor estimated $4300 for 800 SQF patio. It's far above my budget.
Thanks.
|
Follow-Up Postings:
|
- Posted by houseofsticks (My Page) on Thu, Jul 19, 12 at 15:42
| Just priced this cheapest price was $8/sqft+ $250 for stamped and colored which is very cheap of up to 380sqft above 380sqft is 6/sqft. It is usually around 12/sqft stamped and colored here but I used to work for a major co and we used them before so I was aware of his price and quality. Near Charlotte NC. just plain old driveway concrete is $3/sq ft from the same co. Check psi and thickness when you get quotes so you know it's apples to apples. |
|
- Posted by david_cary (My Page) on Sat, Jul 21, 12 at 7:29
| So that is pricey for plain jane concrete. Perhaps your contractor is adding 20% for himself.... But would you really want an 800 sqft patio of gray plain concrete? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Building a Home Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.