|
Mon, May 28, 12 at 21:00
We decided to have the range hood's venting system go through the wall behind the range hood, up by ceiling of mud hall and up to the roof. Because of that, the area where the top of our mud hall lockers were supposed to meet the ceiling has a soffit of drywall that covers this venting. So, the situation is that the part of the lockers that end at the wall with the soffit will not be able to go to the ceiling as we originally designed. Would it look awful if half the lockers went to the ceiling and half did not? I'm including a photo of the lockers we are trying to copy in case that helps.
 |
Follow-Up Postings:
|
- Posted by threeapples (My Page) on Mon, May 28, 12 at 21:01
| i should add that, unlike the photo, we don't have lockers on the short wall. we have an exterior door there. |
|
- Posted by palimpsest (My Page) on Mon, May 28, 12 at 22:30
| Is the soffit in a position where it could be paneled to match the lockers or that it could be hidden by the lockers? |
|
| That is what I was thinking too. See how, in your inspiration picture, behind the ladder, there is a section that is different, but has some paneling. Could you do something like that in that upper portion? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Building a Home Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.