Return to the Cooking Outdoors Forum | Post a Follow-Up

 o
Vermont Castings Grills at the Home Depot

Posted by jjc1184 (My Page) on
Thu, Jun 20, 02 at 22:42

Help!! I'm about to buy the 9080 Majestic by Vermont Castings grill at the Home Depot. I did receive one positive posting the last time I asked. Does anybody else have any experience with either Models 9050 or 9080. I sincerely appreciate the feedback!


Follow-Up Postings:

 o
RE: Vermont Castings Grills at the Home Depot

Perhaps one should ask lpsage since HE is the CGE.


 o
RE: reply

I've seen those grills at home depot. Buy a Virco if you can
find one.


 o
RE: Vermont Castings Grills at the Home Depot

I checked out the grills at Home Depot and Lowe's (Jenn-Aire). The Members Mark is $300.00 cheaper and comparable, if not better. I eventually purchased the Virco which was still less expensive and, in my opinion, a much bigger bang for the buck.


 o
RE: Vermont Castings Grills at the Home Depot

I agree on the VIrco. I was going to buy the JennAir version of the Vermont Castings grill at Lowes, but all the local stores were sold out on July 3rd. So that made me do some more research and I came upon the Virco. I started calling around the different Costco's in my area and none were available, but were on the way. Finally got one yesterday. WooHoo.

Comparing the $799 Virco to the $599 JennAir. Adding the side burner and rotisserie puts the JennAir at $750. The Virco is ALL SS, Bigger, Hotter, and Costco's liberal return policy puts way above the Vermont Castings.

TRY TO FIND A VIRCO IF YOU CAN.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Cooking Outdoors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here