|
| I bought an outdoor turkey fryer yesterday. However, the regulator/hose assembly is attached to a timer/safety device that makes running it next to impossible. It won't stay lit and once you think it will, it goes out.
I have seen many burner assemblies similar to this one where the regulator/hose assembly attaches directly to the burner. That's what i would like. However, the end of the hose that goes into the timer/safety device is just a little too small to screw directly into the burner. Is there a fitting that I can buy to get them to work together? Or, will I need a new hose? It looks like the longer portion of the hose can be disconnected from the regulator and likely replaced with a hose that has the correct size male fitting on it. Is this right? Obviously I'm looking for the most reasonable but safe fix. Thanks, Greg |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Cooking Outdoors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.