|
Tue, May 27, 08 at 23:44
| I just purchased a Kenmore 16315 Gas Grill. Assembly took a little longer than the manual indicates but overall not bad. All 5 main burners fire right up via electronic ignition, and the side burner works fine, but I cannot get the infrared rotisserie burner to fire up. I know it's getting spark from the igniter (I can see it). I do not have the main burners or side burner fired up when trying to ignite the rotisserie. I also do not hear or smell any gas when I turn the rotisserie control to 'High' and try to ignite.
Any suggestions ? Thanks |
Follow-Up Postings:
|
- Posted by weedmeister (My Page) on Sat, May 31, 08 at 23:32
| Does it have a thermocouple? if so, I think you have to put a flame to it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Cooking Outdoors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.