|
Thu, Dec 13, 12 at 20:23
| Glass went in yesterday and I was counting the hours to try out the steam. It's divine. I had the fan going in the bathroom and nothing was fogged up outside the shower! Here's a question for steam shower experts - there seems to be a very thin layer of dust on everything in the shower now that it's all dried. I don't think the dust was there before... |
Follow-Up Postings:
|
| I've not seen an issue like that, even if you had hard water and a water softener. It shouldn't be leaving a mineral residue from hard water. There is the possibility that is could be something like residual grout haze. But that would just be on the tile, not on the plumbing fixtures and shower door too, and it would likely show some sort of "wipe" or "smear" marks on it from the grout clean up. It could also be one of those "first use" things. I'd call Thermasol and ask their tech department. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.