|
Mon, Oct 24, 11 at 21:59
| We have 8x10 white tiles and 47" width of wall. We were going to put them in a staggered position, but that would end up with just a one inch sliver every other row. Are there photos of tiles with an offset of 7" rather than at the middle 5" of the tile? I'm having a hard time explaining the problem. Can't find it on Bridge's tile website either. thanks. |
Follow-Up Postings:
|
- Posted by weedyacres (My Page) on Tue, Oct 25, 11 at 19:42
| Just shift your whole design over by 3". So if your original plan was: odd rows: start with full tile, end with 6" tile even rows: start with half tile, end with 1" tile your new plan would be: |
|
- Posted by bill_vincent (billvincent@hotmail.com) on Tue, Oct 25, 11 at 21:21
| Weedy-- we know you meant TWO inches. :-) |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.