|
Tue, Oct 16, 12 at 18:35
| doing an inline frameless shower door about 58" wide with 1/2" glass. Will consist of one fixed panel and the door. Door will be hinged on the wall and be about 28-30" and NOT go all the way to teh ceiling. The panel will be the remaining width and will be hooked with clips. Was trying to decid on 3 options for panel. 1) have it go all the way to ceiling and attached at floor and ceiling. 2) have it same height as shower door and only attached with clips at side and floor and use support bar off teh top. 3) 2) have it same height as shower door and only attached with clips at side and floor. So my qustions are: How much wobble in #3 and is this unsafe? How bad does #1 or #2 look?
Thanks! |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.