|
Sat, Sep 8, 12 at 21:32
| We have a 66" vanity, and a 60" tub that butts up to one end of a 36" x 60" shower which has a seat. The idea is that the marble would "flow" from the tub top and continue to the top of the shower seat. We found a great deal on a Carrera marble slab which is 97" x 76". The marble would be used for the tub top and would continue onto the shower seat.
The slab is small, but it looks like we should be able to do the vanity top and tub + shower seat except we would have a seam in between the tub and shower seat. But, the seam should be covered up by the frameless shower door. Anyone see any potential problems with this? I'm going to go over this with our GC and fabricator just to make sure my measurements have enough slop in them to make the cuts. Just wanted to hear GW's opinion on this! Thanks! |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.