|
Sun, Aug 26, 12 at 17:17
| So I'm looking for some help here, I really would like to use 12x24" shower tiles in my 3 wall alcove bath/shower (32"x60"). On the short wall which will be 32" how can I run a brick staggered layout with the 12"x24" tile, 3 1/4"x12" bullnose, without it looking funky? |
Follow-Up Postings:
|
| You running horizontally or vertically? Given the bullnose it sounds like horizontally? |
|
| yes horizontally, its the short wall that I'm having trouble with figuring out. A contractor will be doing it, but I don't want to hear any excuses from them. Also, should I run a piece of bullnose past the top of the tub all the way down the wall, or just run the bullnose to the tile flange of the tub? |
|
- Posted by bill_vincent (billvincent@hotmail.com) on Sun, Aug 26, 12 at 17:40
| Start with pieces 8 3/8" and 19 3/8" against the bullnose and you should end up with the same size pieces in the corner. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.