|
Wed, Aug 22, 12 at 15:56
| Hi folks. We have to settle on a shower enclosure in the next few days and would like any input someone may have for us.
This is an alcove type shower that will be in a bath that will serve as a "master" bath for the next 4-5 years. After that time, it will be a guest bath, which should only get use 4-5 weekends per year. That said, we are not interested in the expense and time required to have a tile or solid surface shower. Properly installed (meaning on a bed) will a gelcoat fiberglass 1-piece unit be sufficient? Why/Why Not? As the shower can not be any deeper than 33-1/2", there seems to be a limited number of manufacturers from which to chose. Clarion Bathware seems to offer one, as does Aker by Maax. Do you have any other suggestions? Thanks for any help |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.