|
Thu, Jul 26, 12 at 15:31
| Hi,
I have a rather odd dilema. We have an alcove but we don't want to use the entire length for the tub. At one end, we want to put a ledge of about 6". The only problem is the tub we want has an integral flange around the three sides (as well as an integral apron). Does anyone have any suggestions of how we would tile the ledge area up to or over the flange? Or is this a bad idea altogther? Attached is a (very badly drawn!) picture to help in case it was explained well. Thank You. |
Follow-Up Postings:
|
| I'd just make it a raised ledge and tile up and over with the horizontal surface overhanging the vertical surface. |
|
- Posted by barbcollins (My Page) on Sat, Jul 28, 12 at 7:10
| We did it like KevinMP suggested, but raised it up enough so it could either be a ledge/shelf or a seat.
|
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.