Return to the Bathrooms Forum | Post a Follow-Up

 o
Tub-mounted faucet isn't laying flush on tub

Posted by threeapples (My Page) on
Wed, May 22, 13 at 21:48

We have the Jacuzzi Mio and the plumber said I needed to install our Rohl tub filler and handles on the tub itself, not the tub deck. It's installed now and the fittings are not flush on the tub, there is space between them and the tub. I'm annoyed I didn't insist it was installed on the tub deck, but there isn't anything I can do about it now. The fittings are on the corner of the tub if that makes sense. Is it possible to have these flush with no space?


Follow-Up Postings:

 o
RE: Tub-mounted faucet isn't laying flush on tub

Here is a tub like yours with tub filler set installed. It's flush. Not sure why yours isn't - it should be:


 o
RE: Tub-mounted faucet isn't laying flush on tub

Perhaps the rough in with the valve was too high and when they installed the trim, it won't sit down.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Bathrooms Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here