Return to the Bathrooms Forum | Post a Follow-Up

 o
Primer Choice for Bathroom Ceiling?

Posted by thebigad (My Page) on
Fri, May 17, 13 at 13:47

Our master bathroom (house bought last year and renovated by previous owner) shows dots of mold/mildew on the ceiling after about a month of use. I wipe it down with a bleach pad. If we don't use the bathroom, no stains. So, I guess the steam from the shower causes the mold/mildew. There is no mold/mildew on the walls - just ceiling.

We run the bathroom fan, but maybe because of the distance, it doesn't suck out all the moisture. I'm not in a position to move it closer to the shower right now. For one, there is a rainfall shower head that would have to be replaced. So, let's say the fan stays put.

The only other issue I can address is that the ceiling paint is a simple flat interior paint. I guess they didn't use a bathroom paint. So, I thought I would put primer over the existing paint and then buy the Sherwin Williams bath paint and put it over the primer.

So, questions:

1. What primer should I get? Water-based or oil-based? From searching online, I can't figure out which one.

2. Note that this primer is going over existing paint. Other than sanding down and wiping the ceiling clean, do I need to do anything else before I prime? Does your answer change based on the type of primer?

3. How many coats of primer do I need to apply?

Thanks in advance!


Follow-Up Postings:

 o
RE: Primer Choice for Bathroom Ceiling?

Bleach will not kill mold. It can actually feed it.

In simplistic terms, think of bleach as being "bleach" and "water". The "bleach" part, because of it's chemical make-up, will not penetrate into many materials. It doesn't soak in. It simply sits on the surface. The "water" that carries the bleach? It does sink in and penetrate many materials. And what helps create an environment for mold and mildew to thrive? Moisture!

When people use bleach, sure the discoloration of the mold goes away because the mold that sits on the surface is indeed killed by the bleach, and the discoloration is "bleached" away. But the water penetrates, feeds the roots of the mold, and the mold will usually return.

Try this product to actually kill the mold: Concrobium Mold Control. It's available at the box stores. Kill the mold, then prime with a primer/sealer from the Kilz line. Or with any other good primer/sealer that you can find.

Then paint with any decent bathroom paint.

The Concrobium will kill the mold and mildew.

The Kilz primer/sealer will prevent any stains from the mold/mildew from being activated by the primer or paint and bleeding eventually bleeding through the final coat of paint. You can do more than one coat if you choose. Just read the directions for recoat times.

My recommendations at least. Just an opinion.


 o
RE: Primer Choice for Bathroom Ceiling?

Thanks. What about questions 1 and 2? What kind of primer to put on the existing paint?


 o
RE: Primer Choice for Bathroom Ceiling?

Your questions all were answered. Mongoct named the products to use. I'd like to suggest a more powerful fan too, with a timer so you can run it long enough to get the moisture out.

-Babka


 o
RE: Primer Choice for Bathroom Ceiling?

Babka

Does Kilz only make one type of primer? I thought they had oil and latex versions. That is why I asked. Also I didn't see anything about sanding the ceiling in the original response.

Perhaps someone else can help with those questions.


 o
RE: Primer Choice for Bathroom Ceiling?

I went with Zinsser Bulls Eye primer. Two coats. Followed by Zinsser Perma White matched to my ceiling color. Not sure how many coats I will do of that.


 o
RE: Primer Choice for Bathroom Ceiling?

Hmmm. Part of my primer reply didn't get posted. So here's the inadvertently deleted part plus a bit more:

1) I'd use either Zinnser BIN primer/sealer, the shellac-based one...

Or KILZ original.

2) Follow the instructions for using the Concorbium. I wouldn't sand after using it. If you did want to sand due to required surface preparation, ie, the ceiling simply needs to be sanded, then I'd first use Concorbium as an initial treatment. Then clean or wipe down. Then sand. Then another treatment of concorbium. Then a wipe down, then prime. Prime following the primer instruction. Then paint according to the paint instructions.


 o
RE: Primer Choice for Bathroom Ceiling?

Thanks. I went latex. I'll reactivate this thread if problems persist so that others can learn from my (hope not) mistakes!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Bathrooms Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here