|
| Our new, rather small, master bath is going to have a partial glass block partition to separate the tub from the counter area.
Actually, the head of the tub butts up to a low wall (maybe 32" high) that holds the bathtub plumbing, and the glass partition will sit on top of that wall. The partition will be only about 32 inches wide and about 56 inches high, stopping a foot or so short of the ceiling. We could go with 8x8, 6x6, or even 4x4 blocks. My inclination is 8x8, which divides nicely into 32 and 56 :-). I am a little concerned that it will look too chunky. What did you use in your bath or other area? I've looked at pictures of glass block structures on houzz.com, but they never seem to mention the dimensions of the blocks. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.