Return to the Bathrooms Forum | Post a Follow-Up

 o
marble "skirt" on standard alcove tub

Posted by eks6426 (My Page) on
Mon, Apr 8, 13 at 14:32

I have a crazy idea. I was at the granite shop looking at a slab of marble for my vanity and realized I'd have tons of extra. So, I got to thinking, how would a marble "skirt" on a standard cast iron tub in an alcove setting look? I'm thinking we could cover the side of the tub as well as do a top surround that would sit on top of the lip of the tub all the way around giving it a little ledge.

Has anyone seen anything like this? I've seen it done with drop in tubs but ours is a 1940s standard tub that is getting reglazed.


Follow-Up Postings:

 o
RE: marble "skirt" on standard alcove tub

You are essentially talking about creating an undermount tub out of an alcove tub, which would be fine if you wanted a tub only usage from it. If you want to use it to shower, then anything you place on top of it has to slope to the inside of the tub so that the overspray runs back into the tub rather than all over your floor. You're not going to be able to bend a slab of stone to do that. If you do use the slab for the apron, then you will have a seam at the top between the slab and the tub. That may not be that attractive and wil need to be kept caulked in order for water to not penetrate it and cause damage to the subfloor below.


 o
RE: marble "skirt" on standard alcove tub

Thanks Green Design. This tub is definitely used as a shower...only full bath in the house. Sounds like my dreams were bigger than reality. C'est la vie.


 o
RE: marble "skirt" on standard alcove tub

I have a question? How do drop-in tubs with showers avoid this problem then? Wouldn't they have the same issue of water hitting the edge/sides?

Anyhow, I would google and do some more research before negating the possibility of this working.

Here is a link to a GW post with pics of what you're contemplating.

Here is a link that might be useful: alcove tub


 o
RE: marble "skirt" on standard alcove tub

Drop in tubs are unsuitable for use as a tub/shower. They are designed for tub use only. A tub for a tub/shower has an integral tile flange that is covered by the wall cladding to direct the overspray back into the tub.

If I were you, I'd replace the tub. There is no longer any process that is a true "reglaze" of the tub where it is refired and liquifies the porcelain like the original process. All that is currently possible is a heavy duty paint. That will eventually fail. Many sooner rather than later.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Bathrooms Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here