Return to the Bathrooms Forum | Post a Follow-Up

 o
Shower plumbing without recessed panels - risky? Acceptable?

Posted by alina_1 (My Page) on
Mon, Apr 28, 14 at 11:13

I am working on the design for our master bath renovation. I planned to install a shower in the corner against two external walls. To not compromise insulation, I planned to build a raised rectangular column to hide all plumbing for shower head, handheld shower, valve, etc. I planned to tile this column.

Now, my husband says that since there will not be recessed panel for plumbing with such layout, I have to change the design. Honestly, it ruins all my plans - the only change I can make is switching shower with whirlpool tub so the tub is in that corner. This will not resolve the problem - I wanted to use the tub as a shower/tub combo and it will also require similar plumbing.

Any thoughts? Is it really risky to install the plumbing/pipes without access panels? What is the common practice - to make plumbing accessible no matter what?


Follow-Up Postings:

 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

Why not make the tiled column removable? It's not that tough.


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

You mean the entire column? Not sure how to do this and still keep the waterproofing reliable... To caulk the seams?


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

It's rare that all the plumbing is accessible through a panel - just the parts behind the valve usually are. Can you put in a removable panel as part of the column (side?).


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

The sides of the column will be just about 4"-5", so not very suitable for repairs..
You guys gave me a new idea - what if I make the front surface of the column removable? I can install those magnetic catches that are used for whirlpool motor access panels and then caulk the seams with the sides of the column.

Do you think it would work?


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

Another thought might be - repairing leaky faucets can be done from the room side. Make sure you buy quality, readily available faucets so repair parts will be available and nothing inside the wall will have to be replaced until the next remodel. When the tile guy comes over to estimate the job, tell him that when the job is done, you want enough new tile leftover to redo the plumbing column area - two times over. Put the boxes of tile in the attic or corner of the basement storage room and forget them.


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

Thanks DreamingoftheUP,

The tile guy would probably be me :)

The faucets I chose are from Delta Vero line - lifetime warranty, so despite plastic parts in the valve, I do not worry about repairing them. As you said, they can be repaired from the room side. The worst fear is the pipes - what if something will go wrong? We are going to try Kerdi shower system. My vivid imagination draws a terrible picture of the entire shower being destroyed to reach that pipe ;)

Well, anyway, keeping some extra tiles is a great idea for this project I guess.


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

The worst fear is the pipes

It can happen. And if it does, it sucks. But really, how many bathrooms (or other parts of the house/building) have you ever seen that allow easy access to ALL the pipes? Every wall would have have a removable panel!


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

Thanks for your ideas and thoughts! As always, it is so helpful :)

I feel better now. I have at least two acceptable solutions for this - a removable front panel on my column and some extra tiles to repair the column if there is a problem with pipes.


 o
RE: Shower plumbing without recessed panels - risky? Acceptable?

I don't think there is any reason to go to all the trouble to make it removable. Use L copper. Install fixtures that have a rough in that stays in the wall. The actual valve and trim are accessible from the outside.

If you're really worried - keep some extra tile.

Here is a link that might be useful: Example: Grohe iBox Rough In


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Bathrooms Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here