|
Sat, Jan 21, 12 at 23:14
| My husband and I are building our own house. We are preparing the basement so we can move into it while we work in the main part of the house. So, we bought a Maax one-piece tub/shower unit for the bathroom. The tub has 2 feet that instructions show a wedge under instead of using cement on the floor and setting in that. We have about 2in so will use a small block. Has anyone installed one of these? We are looking for any tips. Thanks. Lisa |
Follow-Up Postings:
|
| Lisa go to Utube and type in the brand of your unit and installation and you'll see lots of help. We're installing a Swanstone one right now. Not as easy as I thought it would be but we'll get it done. Good luck. |
|
| Thanks yayagal! We got it figured out. Lisa |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Bathrooms Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.