Return to the Basements Forum | Post a Follow-Up

 o
Epoxy vs Porch Paint for concrete floor in 101 yo basement

Posted by kawamida (My Page) on
Mon, Nov 19, 12 at 13:46

Need EASY DIY solution for concrete basement floor. If you've used any of the following I'd love to hear how it went for you:

Looking at either:
1) Latex porch/floor paint - prime and paint, like walls
2) 1 or 2 stage Epoxy - maybe a garage floor kit? Have heard these are either fantastic or total garbage. Paint store people tell me it's overkill but I think it looks pretty good. Behr makes a 1 stage epoxy (Home Depot). Lots of 2 stage garage floor kits, I'm thinking H&C (Sherwin Williams) because they have an ivory color that I like. Also thinking the confetti bits are good as they will help disguise minor imperfections. Cheesy but useful. Have heard this is a bad idea if I don't etch the floor 1st... Any experience here??

Any and all info/tips/recos gratefully accepted!! THANK YOU!

Reno nearly complete (drywall, paint) on our old basement except for floor. We have ruled out other floor coverings (tile, vinyl plank) and are planning to paint concrete and cover with area rugs. Will be in a small rec room/guest room, hallway and laundry/workshop. Not really high traffic.

Paint will be DIY project.
- There is existing mystery paint on concrete that is peeling.
- Planning on scraping as well as possible. Will rent sander if needed.
- Trying to avoid acid etching if possible. Sounds dangerous.
- Will patch and cure for 3 weeks as recommended.
- Will vacuum and clean as much as possible.
- Floor is in ok shape, but it is old. Ceilings low, budget tight, going to work with what we have.
- No moisture issues, but it is and old basement and we are near Lake Ontario. Not expecting perfection, just don't want to have to re-do in a year.


Follow-Up Postings:

 o
RE: Epoxy vs Porch Paint for concrete floor in 101 yo basement

Hi,

I really need your help.

I'm doing some painting in my backroom, in my basement, on the floor.

In looking up prices on painting the backroom floor, in the basement. It's about $0.50 to $1 per sqft from what I can see.

It's about 100sqft with some odd shapes and the area equipment removed from the sum (eg water heater, sump pump, hvac).

My nephew had to learn how to do this for this job, which meant I had to learn too, step by step talking to each manufacturer, store personnel etc as he was with me listening as I asked the questions, we both listened.

So essentially I had to instruct him even after this pretty much exactly what to do and over see much of this. He is in late 20's.

So far we are 1/2 through it. He has etched it, and the next step is painting it. The first part took 5 hours buying and 4.5 hours to etch using acid to make the concrete porous.

The next step is two costs of paint. on the floor, It's already bought. My nephew will have to do the trim and then roll the paint, and then do another coat.

He has experience in painting so that part should not take that much time, maybe 3 hours then some dry time and then the last coat and then clean up.

So I look at this as a learning experience but I want to be fair paying. Any guidance?

hp


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Basements Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here