|
Mon, Oct 13, 08 at 11:10
| About 25% of my 16/16 crawlspace is exposed ledge. There is about 12" between the ledge and the underside of the joists. Can I seal the vapor barrier around the ledge or do I need to cover it? I figure Granite does not leach water.
Its not about being cheap, but ease of install. I figure its easier to fasten the barrier to the rock then try to cover between the ledge and floor. |
Follow-Up Postings:
|
| never mind |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Basements Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.