|
Wed, Feb 28, 07 at 14:14
| We removed some paneling in our basement and applied Drylok to the walls. We want to just leave the painted concrete as the finish is good. However, the carpet does not go to the edge because it was put down when there was paneling so there is a couple inch gap.
Does anyone have any recommendation for a way to make the gap between the edge of the carpet and the newly painted wall look nicer? Our thoughts are 1. Complimentary carpet squares
We're not sure how the end result would look since it's just a few inches of bare floor. Thanks,
|
Follow-Up Postings:
|
- Posted by jasper_60103 (My Page) on Wed, Feb 28, 07 at 16:33
| Andrew: Also, you could use a complimentary vinyl tile around the perimeter. Trim back the carpet to accomodate the tile. Also, install a transition molding between carpet and tile. -jasper |
|
- Posted by georgiapoollover (My Page) on Wed, Feb 28, 07 at 18:11
| I would try to find a molding if it were me..... |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Basements Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.