Return to the Appliances Forum | Post a Follow-Up

 o
Bluestar/Garland ir broiler adjustment

Posted by sefuller (My Page) on
Sat, Dec 21, 13 at 23:03

I posted recently about a Garland RPB30 project that I recently purchased. After working on it for the last three weeks, I got it connected and operating today and have everything adjusted to where it performs well with the exception of the ir broiler. I converted this range from lp to natural, which required drilling the orifice for the broiler out to a size 50 (according to Adco). The broiler ignites, but never gets red, and will run for at least 5 minutes (the longest I have run it so far) without cycling. There is a "mat" of blue flame covering the surface which extends down 3/4 - 1 inch from the ceramic surface. I don't believe there is an air shutter on the tube for the broiler, so I am wondering what steps I could take to remedy this?
Thanks for any suggestions!


Follow-Up Postings:

 o
RE: Bluestar/Garland ir broiler adjustment

The service manual talks in terms of the various adjustments on the broiler. I'd suggest looking at it. That said, I have no idea about the vagaries of converting to NG from LPG. Good luck.


 o
RE: Bluestar/Garland ir broiler adjustment

Where could I find a service manual? The manual that came with the range addresses adjustment of the open burners and oven burner, but not the broiler. Is there a forum more suited to asking repair related questions?

Thanks.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here